|
Rejuvenating machine - CLARA Series |
|
|
|
full rejuvenating process
One rewashing unit consists of a 4 PVC tanks and
4 stainless steel 9 loop racks of a length of the first tank can be
filled with a chemical agent or film processing agent. This product
circulates and is maintained at a temperature by means of a pump
exchanger. This tank is built so as to receive a stainless steel
element of the ultrasonic transducers that can be immersed. The 2 other
tanks enable rinsing by means of a countercurrent washing. The last
tank contains water with a wetting agent to avoid any stain during the
drying.
water & detergent spray buffers
In tank 2 and 3, a washing box can be installed for a more efficient
cleaning. This box is composed of 2 buffers turning in the opposite
direction of the film run by means of a motor reducer. Before the 2
spray buffers spread water & detergent on the film. After the 2
spray buffers are provided with clean water to remove the last dirty
particles. When placing the washing box on the tanks, the film runs by
circulating from tank number 1 to 3 and 4, or number 1 and 2 to 4.
|
 |
|
ultrasonic cavitation (option)
Ultrasonic cavitation can be installed for an optimum cleaning
of the film (this set & stainless steel element of the transducer
are optional extras).
efficient drying unit
It is composed of 1 or 2 stainless steel cabinets of:
- 2 x 9 loop racks of a length of 70 feet each
- 1 film drying or reheating system
- 1 temperature regulator with probe (whose
adjustment can be easily modified according to the speed and type of film running in the machine)
demand-drive
Film is driven by demand-drive. CLARA uses servo systems, which
employing the smooth continuous-motion of the demand-drive system. The
demand-drive removes the risk of damaging the negative, even if there
is a failure, since it is neither necessary to “pull” nor to “push” the
film as is the case when mechanical sprockets, or pins, are located in
the film sprocket holes.
electronic controlled
CLARA’s take-up and take-off processes are
electrically controlled. It contains the temperature control elements
(drying of the processing tank), an hourly counter and various control
buttons (general, switch on, stop, pump, speed variator).
|
|
independant circulation group
CLARA has an independent circulation group and storage tank. It is
composed of a stainless steel support on which are installed: a group
for temperature operation and a pump for tank 1 (and tank number 2 if
needed). A tank & a pump anabling the washing box to be filled with
water & detergent. |
|
technical specification
Capacity 600, 1200 or 1800 meter (2000, 4000 or 6000 feet)
Film formats 16mm & 35mm
Film speed variable up to 500 m/h, or 1000m/h
Take-off and take-up electronic controlled
Film drive electronic controlled
Solvent used Acetone
range
| Model |
Designation |
| CLARA 500 |
500m/h rejuvenating machine |
| CLARA 1000 |
1000m/h rejuvenating machine |
dimensions
Width: 316 cm
Depth: 130 cm
Height: 199 cm
with rack lifted: 290 cm
Weight: 900 kg
Gross weight: 1200 kg
Power: 220V or 110V single phase 2,5 kVA, 50 or 60 Hz
 Download Rejuvenating machine - CLARA Series Data Sheet
|
